During last month’s furnace tune-up, my partner and I made the decision to purchase a current temperature control for our dwelling. Our seasoned temperature control was a seasoned dial machine, and the two of us could barely even read the numbers anymore. Our furnace corporation helped us choose a nice digital temperature control, with a cool touch screen display. The furnace installed the temperature control while he was at our property. He carefully instructed us how to use the current digital temperature control. Around 8 that evening, the temperature in our current dwelling changed dramatically. My partner and I went out to look at the temperature control, and the temperature had changed to 72 degrees, and we tried to adjust the temperature control back to 68 degrees, but it kept going back to 72 after a short while. We gave up and thought it would be best to contact our Heating and Air Conditioning device carrier in the day. When the two of us got up that day, the temperature control was 68 once again. My partner and I could not really figure out the problem, so the two of us made an appointment to discuss the odd temperature control complications. When my partner contacted the Heating and Air Conditioning device supplier, they right away recognized what the problem was. Our current temperature control was programmable, and the two of us needed to change the settings to remedy the issue. The temperature control was set up to change the indoor temperature at 8 p.m. As soon as my partner and I realized that the temperature control only needed to be programmed, the two of us got out the handbook and made the necessary changes right away. Our programmable temperature control has numerous bizarre temperature settings. We can change the climate conditions during the day, afternoon, and evenings. We decided to make them all the same, in order to prevent any confusion.